Woodcut Tools
Tru-Grind Sharpening System
The Tru-Grind Sharpening System is the best sharpening system available today. It can sharpen a huge range of tools. Such as turning, carving, carpenters, lathe bits, drills and many other items. Fits most bench grinders. Comes with instructional video. It is the ideal sharpening system.
Toolholder & Base slide boxed set with video
and instructional booklet
Woodcut Shepd Irons Toolgate
Designed specifically for use with hollowing tools. Phil Irons Tool Gate is safe and easy to use for all skill levels. The U shaped tool gates stop the tool from sliding sideways when taking the serious cuts common with the Pro-forme tools. This frees up your hand to help control the cut better. A must buy for the hollower.
The toolrest can also be used by those wanting more support for their normal bowl turning.
Woodcut Tailstock Hinge
| Woodcut Tailstock Hinge is easily fitted to the Nova lathes. At the moment it will only fit new bed shape of the DVRXP and N1624-44 lathes. The hinge allows you to move the tailstock out of the way when bowl turning and also increases the bed lenght by 100mm. |
Woodcut Bowl Coring
Woodcut's Safe Easy to use Bowl Coring system removes a perfect bowl every time. Producing several bowls from a single block of wood is safe and easy with the Bowl Saver from Woodcut. You get a predictable result every time along with the security of knowing the Saver is coupled to both the toolrest and the tailstock. Every unit comes with a CD rom video outlining each step of its use.
BOWLSAVER CAPABILTIES
The Woodcut Bowlsaver couples to the lathe via the lathe tool post and is also supported by a Morse taper that fits into the tailstock of the lathe. The Bowlsaver will fit almost all lathes large and small, simply order a toolpost to suit the lathe you are using..
Capacity: The Bowlsaver uses two blades to give a combination of cuts that will remove blanks from 75mm (3”) up to 300mm (12”) from the inside of the mother bowl (outer bowl). The depth that the blades will go into the wood can be adjusted from zero up to 130mm (5”). This in essence will remove a bowl 300mm (12”) x 130mm (5”) from the outer bowl.
Woodcut Bowl Saver Unhandled 
Woodcut Bowl Saver Unhandled including toolpost up to 1".
Woodcut Bowl Saver Handled
Woodcut Bowl saver handled including toolpost to 1" diameter
