Teknatool DVRXP Lathe
SPECIAL DEAL ON THE NEW DVRXP Lathe
FREE SUPERNOVA 2 CHUCK Plus insert
plus FREE DELIVERY Sydney Metro
$50 Delivery for Brisbane and Canberra Metro
The most innovative woodturning manufacturer in the world releases another world first ...
A completely integrated headstock/motor package. This leading edge, patented technology is not available from any other woodlathe manufacturer in the world.
BENEFITS
- New bed design - more solid profile
- New headstock profile - more solid appearance
- New high performance stator/rotor
- New XC control board
- New easy grip rubber toolslide and tailstock handles
- Rear panel provision for fine index facility (accessory)
- Ability to take remote control decive (accessory)
DVRXP lathe full variable electronic speed control from 100 -3500 rpm. 400mm swing over bed. 5 position swivel head 1 1/4" x 8tpi thread spindle. 2mt tapers headstock & tailstock. A full range of accessories are available for this lathe.
What is DVRXP Technology?
DVR stands for Digital Variable Reluctance - a big name for a very simple idea and design!
The heart of the DVR is a combination of the conventional lathe headstock and the motor as one unit - the motor is literally built on the headstock spindle.
The motor is the simplest of motors. Around the outside of the motor are a number of electromagnets. The rotor is an extension of the headstock spindle - it looks like a large toothed shaft. When a magnet is switched on, an intense magnetic field is created and the tooth is pulled to line up with the magnet, then the next magnet is switched on, which forces the spindle to rotate.
Since it works by magnetic attraction, the speed or position of the shaft is unimportant to its torque. The switching of the magnets is controlled by a microcomputer, using an digital display and soft control pad. The motor is smart - it knows the exact shaft position and is constantly computing where the shaft should be. At 2000 rpm, for instance, it is computing the shaft position 24000 times per minute
DVRXP lathe full variable electronic speed control from 100 -3500 rpm. 400mm swing over bed. 5 position swivel head 1 1/4" x 8tpi thread spindle. 2mt tapers headstock & tailstock. A full range of accessories are available for this lathe.
What is DVRXP Technology?
DVR stands for Digital Variable Reluctance - a big name for a very simple idea and design!
The heart of the DVR is a combination of the conventional lathe headstock and the motor as one unit - the motor is literally built on the headstock spindle.
The motor is the simplest of motors. Around the outside of the motor are a number of electromagnets. The rotor is an extension of the headstock spindle - it looks like a large toothed shaft. When a magnet is switched on, an intense magnetic field is created and the tooth is pulled to line up with the magnet, then the next magnet is switched on, which forces the spindle to rotate.
Since it works by magnetic attraction, the speed or position of the shaft is unimportant to its torque. The switching of the magnets is controlled by a microcomputer, using an digital display and soft control pad. The motor is smart - it knows the exact shaft position and is constantly computing where the shaft should be. At 2000 rpm, for instance, it is computing the shaft position 24000 times per minute
DVRXP lathe full variable electronic speed control from 100 -3500 rpm. 400mm swing over bed. 5 position swivel head 1 1/4" x 8tpi thread spindle. 2mt tapers headstock & tailstock. A full range of accessories are available for this lathe.
What is DVRXP Technology?
DVR stands for Digital Variable Reluctance - a big name for a very simple idea and design!
The heart of the DVR is a combination of the conventional lathe headstock and the motor as one unit - the motor is literally built on the headstock spindle.
The motor is the simplest of motors. Around the outside of the motor are a number of electromagnets. The rotor is an extension of the headstock spindle - it looks like a large toothed shaft. When a magnet is switched on, an intense magnetic field is created and the tooth is pulled to line up with the magnet, then the next magnet is switched on, which forces the spindle to rotate.
Since it works by magnetic attraction, the speed or position of the shaft is unimportant to its torque. The switching of the magnets is controlled by a microcomputer, using an digital display and soft control pad. The motor is smart - it knows the exact shaft position and is constantly computing where the shaft should be. At 2000 rpm, for instance, it is computing the shaft position 24000 times per minute
DVRXP lathe full variable electronic speed control from 100 -3500 rpm. 400mm swing over bed. 5 position swivel head 1 1/4" x 8tpi thread spindle. 2mt tapers headstock & tailstock. A full range of accessories are available for this lathe.
What is DVRXP Technology?
DVR stands for Digital Variable Reluctance - a big name for a very simple idea and design!
The heart of the DVR is a combination of the conventional lathe headstock and the motor as one unit - the motor is literally built on the headstock spindle.
The motor is the simplest of motors. Around the outside of the motor are a number of electromagnets. The rotor is an extension of the headstock spindle - it looks like a large toothed shaft. When a magnet is switched on, an intense magnetic field is created and the tooth is pulled to line up with the magnet, then the next magnet is switched on, which forces the spindle to rotate.
Since it works by magnetic attraction, the speed or position of the shaft is unimportant to its torque. The switching of the magnets is controlled by a microcomputer, using an digital display and soft control pad. The motor is smart - it knows the exact shaft position and is constantly computing where the shaft should be. At 2000 rpm, for instance, it is computing the shaft position 24000 times per minute
BENEFITS
New bed design - more solid profile
New headstock profile - more solid appearance
New high performance stator/rotor
New XC control board
New easy grip rubber toolslide and tailstock handles
Rear panel provision for fine index facility (accessory)
Ability to take remote control decive (accessory)
DVRXP lathe full variable electronic speed control from 100 -3500 rpm. 400mm swing over bed. 5 position swivel head 1 1/4" x 8tpi thread spindle. 2mt tapers headstock & tailstock. A full range of accessories are available for this lathe.
What is DVRXP Technology?
DVR stands for Digital Variable Reluctance - a big name for a very simple idea and design!
The heart of the DVR is a combination of the conventional lathe headstock and the motor as one unit - the motor is literally built on the headstock spindle.
The motor is the simplest of motors. Around the outside of the motor are a number of electromagnets. The rotor is an extension of the headstock spindle - it looks like a large toothed shaft. When a magnet is switched on, an intense magnetic field is created and the tooth is pulled to line up with the magnet, then the next magnet is switched on, which forces the spindle to rotate.
Since it works by magnetic attraction, the speed or position of the shaft is unimportant to its torque. The switching of the magnets is controlled by a microcomputer, using an digital display and soft control pad. The motor is smart - it knows the exact shaft position and is constantly computing where the shaft should be. At 2000 rpm, for instance, it is computing the shaft position 24000 times per minute
