Bote-Cote Ancillary Products
There are many other products needed for building a wooden boat with Bote-Cote Epoxy, and most of these are available as ancillaries to the Bote-Cote system.
Fibreglass:
Woven fabric and tapes are the general purpose laminating cloths in weights from 120 gsm to 330 gsm. Knitted fabrics include Uniaxial (0 deg), Biaxial (0/90 deg), Double Bias (+/-45 deg), Triaxial (0/+45/-45 deg), and other fabrics in various weights. The high directionality of these reinforcements greatly enhances the laminate strength, and provides selective strengthening in line with predicted load factors in a boat hull.
Sheathing:
Also known as Dynel, this is a woven synthetic fabric used for sheathing timber boats for improved impact strength and water and abrasion resistance.
Bote-Cote Dispensers:
Hand pumps are available for fitting to all Bote-Cote containers.. For larger requirements a dispensing machine manufactured by J & B Products, Florida, USA, is available.
Bote-Cote Applicator Kit:
Consists of a squeegee for spreading Bote-Cote over large areas, and two filletting paddles rounded at both ends with radii of 6 mm to 30 mm to aid filletting.
